All batteries are fitted with indicator LED’s, multiple output digital voltage meters and total battery load current digital meter.
Magnum 60 is fitted with internal self-resetting electronic fuses, thermal protection and over-discharge protection. The over-discharge protection device will cut all power to the output(s) once the battery has been discharged to the minimum safe level. A Yellow low battery warning LED will flash to give early warning that the cut-off point is close. A Red LED indicates that the battery is fully discharged, at which stage the load should be disconnected. The over-discharge protection function is automatic in operation, and will reset itself during subsequent recharge.
Fully sealed and suitable for air transport. Battery housing machined from a high impact composite for rugged durability. Ultra low-loss design provides maximum power outputut, and gold plated low loss XLR and Fischer connectors fitted as standard.
Output voltages are selected with a switch and/or output cable. Live outputs are indicated by LED above the socket. Battery output can be disabled by switch (excluding HD-30 ).
Low Voltage: XLR: 14V
LEMO: 14V + 24V is available through the LEMO socket simultaneously. (24V max load 5 Amps. Not available on HD-30) XLR: 14 and/or 28V ( depending on XLR socket fitted ) Other types of sockets can be fitted.
Magnum-60 requires Cine Power Super Silver Mega Charger.
|214 mm /
|18Kg / 39.6
|Low voltage run time (10V - 17V):||100w||150w||300w|
|High voltage run time (20V - 30V):||17hrs||8.5hrs||3.5hrs|